Andy SimpsonI'm a long-term partner of this factory. I've been on a field trip.The factory is strong and the grating quality is very good. I cooperated with this grating supplier in 2017.What surprised me was that this factory was very strong,and it was also one of the top local grating factories.
David ZhangMy client told me that it was very smooth.The delivery speed is also very fast,I will receive the goods on the 7th day of the order.And the goods is inexpensive and convenient.
Ajay ParateI have placed an oeder at this factory about FRP grating.The service is good and the grating is perfact.I'll come again.
40mm /30mm /38mm Galvainzed Grating Fixing Clamps
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||Galvanized Steel Grating Clips||Material||Mild Steel,Stainless Steel|
|Specification||40mm/30mm/38mm||Product Date||3days,always Do Repertory|
|Payment Term||TT/LC||Surface Treatment||Galvanized/Polish|
galvainzed grating fixing clamps,
40mm grating fixing clamps,
30mm grating fixing clamps
Galvanized Steel Grating Clips Used For Floor Grating Clips
Product Name:High Quality Grating Clips Galvanized Steel Grating Clamps Type A B C M
Galvanized Steel Grating Clips Specification:
|Type||Specification||Used For||Used For||Used For|
Grating clips to hold down and fix in place our GRP Grating. All made from 316 stainless steel. ‘M’ clip sets come with the clip (that fits over two grating load bars), bolt, nut and washers. ‘C’ clip sets have a threaded nut welded to the underside of the clip and a bolt to secure in place.
M clip also termed as Saddle clip, provides excellent hold-down capability by securing FRP gratings to the support using 2 adjacent bearing bars. We provide M Clips that suit all types of FRP Moulded gratings (Square, Rectangle, Mini & Micro mesh) as well as Pultruded gratings.
Assembly: Standard M Clip comes as set with hex bolt, nut & washer. However, it can also be supplied with self-drilling screw for pilot drilling.
Installation: Insert the M clip in the open mesh FRP grating such that, it sits appropriately on the load bars & the base of the saddle clip is held close to the bottom of the FRP grating panel. For fixing M clip directly into the existing base structure, pilot drill through the hole in the clip and into the substrate then fasten using suitable screw & plug. And, for fixing M clip into a support frame, you will need to drill into the frame, insert the bolt and then tighten the nut & washer underneath the frame.
J Clips hold a single bar and are nearly
the same height as the grating. Thus,
these can be pulled down completely to
the support under the grating.
W Clips are used for holding down plates
and covered fiberglass gratings.
C clips were specifically designed to tie two
panels of molded fiberglass gratings together.
L Clips L clips should be specified to hold one
load bar to the support for lighter duty loads.
M clips clamp 2 fiberglass grating
load bars to the support.
When drilling the support member has
to be avoided, G clips offer the solution.
The lower jaw of the clip grips the support
flange when the bolt is torqued.
Features and Benefits
For grating with bearing bars at 15/16" (0.937) & 1-3/16" (1.188) centers
Use galvanized steel or zinc-plated clips for applications on Aluminum grating
Bolt Holes may distort through forming, but 0.281" diameter pin will pass through 0.312" hole, & 0.328" pin will pass through 0.343" hole
Galvanized Steel Grating Clips Picture: